Description
- 200 Vdc automotive fuse
- Rated Current: 10-63 A
- Rated Breaking Capacity: 10 kA@200Vdc
- Time Constant: 2±0.5 ms
- Dimensions: 10×26 mm
- General purpose fuse for EV/HEV auxiliary protection,
- Ref. To: UL248-20; ISO 8820-8; GB/T 31465.6; QC/T 1174
Name of the manufacturer: ADLER Elektrotechnik Leipzig GmbH
Registered trade name/trademark: ADLER
Postal address: Haynaer Weg 16, D-04435 Schkeuditz, Germany
E-mail address: info@adlerelektro.de
- Battery Charging Protection
- BMS Protection
- Designed to JASO D622, ISO 8820-8, UL248-20,
- Comply to IEC60269-7, UL248-13, GB/T 13539-4
- IATF 16949 quality system
- RoHS and REACH Compliant
During transportation and storage, avoid water seepage and mechanical damage.
Where the following conditions apply, fuses complying with this standard are deemed capable of operating satisfactorily without
further qualification.
- Normal temperature: -5℃-40℃，permissible operating temperature：-40℃-120℃;
- The altitude of the normal site of installation of the fuses does not exceed 2000m and permissible altitude site of installation does not exceed 5000m;
- The air is clean and its relative humidity does not exceed 50 % at the maximum temperature of 40℃;
- Higher relative humidity is permitted at lower temperatures, e.g., 90 % at 20℃;
- Pollution grade Ⅲ
- Under these conditions, moderate condensation may occasionally occur due to variation in temperature.
- For operating conditions other than above, please contact manufacturer.
