Description
• Reliable clearing of DC fault currents
• High cycling performance
• Low watt losses
• Ultra-compact size and power density
• High breaking capacity to 20kA
• QR code marks on each fuse for traceability
Name of the manufacturer: ADLER Elektrotechnik Leipzig GmbH
Registered trade name/trademark: ADLER
Postal address: Haynaer Weg 16, D-04435 Schkeuditz, Germany
E-mail address: info@adlerelektro.de
• Designed to UL 248-20, UL 248-13
• Manufactured under IATF 16949 quality system
• RoHS and REACH Compliant
During transportation and storage, customer should avoid water seepage and mechanical damage.
Where the following conditions apply, fuses complying with this standard are deemed capable of operating
satisfactorily without further qualification.
• Normal temperature: -5℃ to 40℃;
• The altitude of the site of installation of these fuses should not exceed 2000 m above sea level;
• The air should be clean and its relative humidity does not exceed 50% at the maximum temperature of 40℃;
• Higher relative humidifies are permitted at lower temperatures, e.g., 90 % at 20℃;
• Under these conditions, moderate condensation may occasionally occur due to variation in temperature.
For operating conditions other than above, please contact the manufacturer.
