+86-15989219298
Get Free Quote

AEP EV Fuse

Adler AEP series EV fuses are specially engineered and tested to provide best-in-class protection performance in protecting high power battery  charging and managing systems of Electrical Vehicles and Hybrid Electrical Vehicles, up to 65 Vdc / 32 Vdc In ratings from 20A to 200A.

SKU 3b59691d13a6 Category
Get a Quote Now

GET INSTANT QUOTE

    FEATURES

    Product Details

    Description

    • 65 Vdc / 32 Vdc automotive fuseRated Current: 20-200 A
    • Operating Temperature: -40 to 125 degrees C
    • Breaking Capacity: 1.0 kA at 65 Vdc (20-125A)
      1.5 kA at 32 Vdc (20-200A)
    • Installation Method: M5/M6 bolt installation
    • Torque: M5/M6: 4.5±1N·m
    • Recommended fuse holder: BHR030-15-M5

    Name of the manufacturer: ADLER Elektrotechnik Leipzig GmbH

    Registered trade name/trademark: ADLER

    Postal address: Haynaer Weg 16, D-04435 Schkeuditz, Germany

    E-mail address: info@adlerelektro.de

    • Ref. to ISO 8820-5 ; UL 248
    • Approval:TÜV & UL
    • Manufactured under IATF 16949 quality system
    • RoHS and REACH Compliant

    During transportation and storage, avoid water seepage and mechanical damage.

    Where the following conditions apply, fuses complying with this standard are deemed capable of operating satisfactorily without further  qualification.

    • Normal temperature: -5℃-40℃，permissible operating temperature：-40℃-120℃.
    • The altitude of the normal site of installation of the fuses does not exceed 2000m and permissible altitude site of installation does not exceed 5000m.
    • The air is clean and its relative humidity does not exceed 50 % at the maximum temperature of 40℃.
    • Higher relative humidity is permitted at lower temperatures, e.g., 90 % at 20℃.
    • Pollution grade Ⅲ.
    • Under these conditions, moderate condensation may occasionally occur due to variation in temperature.
    • For operating conditions other than above, please contact manufacturer.

    Custom Containers FAQs

    Qigao is a welder and flame cutting machines leader in China. We insists on supplying professional technology, high performance and good after-sale service to meet the requirements of customers from around the worlds. China Qigao will try our best to become your one-stop supplier. Name your detailed task and we will find a solution together!

    These oxy-fuel flame gas cutting machine are well used in shipbuilding, oil production, metallurgy, metal structure and other manufacturers etc.

    Different sizes of the cutting tips, different cutting thickness. First confirm the needed cutting thickness, then select the corresponding cutting nozzles. See below detailed parameter of G02 （acetylene）and G03 （propane）tips.

    TypeNo.Gas cutting
    aperture(mm)    		Cutting
    Thickness(mm)    		Cutting speed
    (mm/min)    		Oxygen
    pressure(Mpa)    		Acetylene
    pressure(Mpa)
    Acetylene
    GO₂    		#000.85-10600-4500.2-0.3>0.03
    #01.010-20480-3800.2-0.30.03
    #11.220-30400-3200.25-0.350.03
    #21.430-50350-2800.25-0.350.03
    #31.650-70300-2400.3-0.40.04
    #41.870-90260-2000.3-0.40.04
    #5290-120210-1700.4-0.60.04
    #62.4120-160180-1400.5-0.80.05
    #72.8160-200150-1100.6-0.90.05
    #83.2200-28090-600.6-1.00.05
    #93.6270-35090-600.7-1.10.05
    #104350-40070-500.7-1.20.06

     

    Type

    No.

    Gas cutting
    aperture(mm)

    Cutting
    thickness(mm)

    Cutting speed
    (mm/min)

    Oxygen
    pressure(Mpa)

    Acetylene
    pressure(Mpa)

    Propane
    GO3

    #0

    0.7

    5-10

    800-450

    0.2-0.3

    >0.03

    #1

    0.9

    10-20

    480-300

    0.2-0.3

    0.03

    #2

    1.2

    20-35

    400-320

    0.3-0.4

    0.03

    #3

    1.5

    35-60

    350-280

    0.3-0.4

    0.03

    #4

    1.8

    60-90

    300-240

    0.4-0.6

    0.04

     

    #5

    2.1

    90-130

    260-200

    0.4-0.6

    0.04

    #6

    2.5

    130-180

    220-180

    0.4-0.6

    0.04

    #7

    2.7

    180-250

    200-160

    0.5-0.7

    0.05

    #8

    3.1

    250-330

    180-140

    0.5-0.7

    0.05

    #9

    3.5

    330-380

    130-90

    0.6-0.8

    2.05

    #10

    4.0

    380-450

    90-50

    0.6-0.8

    0.05

    Yes, they can. Our standard machines are with the circling-parts to do extra circling cutting, including their main straight-line cutting function. What’s more, the plasma cutting also is available.

    The main differences between CG1-30A and CG1-30B is the working rail. 30A is with “H” rail, 30B is with hole rail. You can select the wanted rail before confirm the order. The rail is different, the price will be different.

    MIG welders, TIG welders, MMA welders, hand spot welding machines, welding carriage and portable spot welding machines, stud welding machines and so on.

    What is the warranty time for welding and cutting machines.

    Customers Also Searched

    Professional supplier of gas cutting machines, pipe gas cutter, oxy-fuel cutting machines, CNC plasma cutting machine, welding rod oven, beveling machine and welding machines supplier in China.Here Are A Few Options You Can Use Alternatively.

    Related products

    Sunday-Riley-skincare-1.png
    Agent-Nateur-Personal-Care-1.png
    Phyto-C.png
    Wuli-Grooming-Hair-Care-1.png
    By-Strom-Nail-and-Beauty.png
    Fashion-Nails-1.png
    Waterlily-Skin-Body-Spa-1.png

    Get Custom Quote

    Have a question? Get in touch instantly using the form below.
    Our customer support team would get back to you soon.

      Get Custom Quote